ACSLS commands

acsss_config	run configuration script
bpdb.acsss	backup acsls database
cmd_proc_shell	provide shell access to the cmd_proc
config drives	dynamically enables the addition, changes or delete drive type
db_command start|stop	start or stop database
db_export.sh -f db_file	to migrate acsls database to another version
db_import.sh -f db_file	Import acsls database from another version
del_vol	delete volume from an offline lsm
drives_media.sh	display all drives types, media types and drive-to-media compatibility
find_tty.sh	identify any available port that can be used by acsss
get_license_info	display details on the installed license
greplog	utility to filter acsss_event.log
kill.acsss	terminate acsls
rc.acsss	start acsls
rdb.acsss	restore/recover acsls database
bdb.acsss -f /dev/rmt/2	backup database to specific tape
bdb.acsss -f db_file	backup database to specific file
stats_report	gather library volume statistical information
volrpt	create volume report
watch_vols	automatically assign ownership and pool association to volume as they are entered trough the CAP
idle	stops acsls from processing new request
set cap mode automatic|manual	change cap mode to automatic or manual exp: set cap mode automatic 0,0,1
set cap priority	Exp. set cap priority 16 0,0,1
Audit Exp. audit 0,0,1 lsm 0,0 audit 0,0,1 panel 0,1,12	update acsls database to match the actual inventory of library volumes. to audit lsm 0,0 and specify cap 0,0,1 for ejection to audit panel 12 and specify cap 0,0,1 for ejection
query request all	to display request IDs for all current and pending request
query volume DX123	query specific volume
cancel	cancels a current or pending request
clear lock Exp. clear lock drive 0,0,10,0	to remove all active and pending locks on specific tranport or volume clear lock for drive 0,0,10,0
mount	Mount specific volume to specific drive Exp. mount clnu001 0,0,10,0
Dismount	dismount specific volume from specific drive exp. dismount EDU200 0,0,10,1
move	move a specified volume to an available storage cell
eject	eject specific volume to specific cap
eject enter	Exp. eject EDU2000-EDU2050 insert/import cartridge to library from specific cap
venter	make a cap ready to enter unlabelled cartridge (L5500, SL500 and SL8500 do not support unlabelled cartridge)
set clean exp. set clean 50 CLNU001 set clean off CLNU001	set the maximum usage of cleaning cartridge set the maximum use to 50 set cleaning cartridge atribute off
set owner volume | volrange	set volume ownership
set scratch [off] | volrange	set or clear a volume scratch attribute and assign the volume to a pool
switch lmu	manually switch lmu (on dual lmu configuration)
logoff	exit from cmd_proc

Other command:
———————
vary acs 0 offline|online
vary lsm 0,0 offline|online
vary port 0,0 0,1 offline|online
vary drive 0,0,10,0 offline|online
display cap 1,1,1
display drive 0,0,10,* -f type serial_num
display drive 0,0,10,* -status available
display cell
display lock
display lsm
display panel
display pool
display port
display volume
query acs all
query lsm all
query server
query port all
query clean all
query cap all
query drive all
query server
query lmu
query lock
query scratch
————–
$testlmu >>send a test packet from acsls to LMU (port must be offline to acsls)
$probe-scsi.sh >>send a scsi inquiry test packet to scsi-attached lsm
$probe-scsi.sh /dev/mchanger0
$testports >>test libary connection (will not work while acsls running)
$ck_port_node.sh >>for solaris only
$lsdev -C -c tty >>AIX
$lsdev -C -s scsi